• Remove the starter clutch cover 2.
• Hold the starter clutch using the special tool and loosen the
clutch spring set bolts in a crisscross pattern. Then, remove
the bolts.
) 09920-34810: Starter clutch holder
• Remove the clutch pressure plate 3, clutch drive plates and
clutch driven plates.
• Remove the spring washer 4 and spring washer seat 5.
• Remove the thrust washer 6, clutch release bearing 7 and
clutch push piece 8.
• Draw out the clutch push rods (9 and 0).
ENGINE
3-17