Suzuki GSF650S Service Manual page 287

6-50 ELECTRICAL SYSTEM
• Make sure that air bubbles 6 are coming up each electrolyte
container, and leave in this position for about more than 20
minutes.
NOTE:
If no air bubbles are coming up from a filler port, tap the bottom
of the electrolyte container two or three times.
Never remove the container from the battery.
• After confirming that the electrolyte has entered the battery
completely, remove the electrolyte containers from the bat-
tery. Wait for about 20 minutes.
• Insert the caps 7 into the filler holes, pressing in firmly so that
the top of the caps do not protrude above the upper surface of
the battery's top cover.
#
* Never use anything except the specified battery.
* Once the caps have been installed to the battery, do
not remove the caps.
* Do not tap the caps with a tool such as hammer
when installing them.
For initial charging, use the charger specially designed for MF battery.
#
* For charging the battery, make sure to use the charger specially designed for MF battery. Other-
wise, the battery may be overcharged resulting in shortened service life.
* Do not remove the cap during charging.
* Position the battery with the cap facing upward during charging.
CORRECT
INCORRECT