Suzuki GSF650S Service Manual page 107

• Install the gearshift shaft 5.
NOTE:
Align the center teeth on the gearshift shaft with the center teeth
on the gearshift cam driven gear.
• Install the washer and fix the gearshift shaft with the circlip.
) 09900-06107: Snap ring pliers
OIL PUMP DRIVEN GEAR
• Install the washer 1, pin 2, oil pump driven gear 3 and
washer 4.
• Fix the oil pump driven gear with the circlip.
) 09900-06107: Snap ring pliers
• Install the thrust washer 5 onto the countershaft.
NOTE:
The flat surface of the thrust washer should face out.
• Install the generator/oil pump drive gears 6 onto the primary
driven gear assembly 7 as shown.
ENGINE 3-71