3-90
ENGINE
OIL COOLER
INSPECTION AND CLEANING
Inspect the oil cooler hoses for damage and oil leaks. If any
defects are found, replace the oil cooler hose(-s) with a new
one.
Inspect the oil cooler for oil leaks. If any defects are found,
replace the oil cooler with a new one.
If the fins are bent or dented, repair them by carefully straighten-
ing them with the blade of a small screwdriver.
Blow out any foreign matter that is stuck in the oil cooler fins
using compressed air.
$
* Make sure not to bend the fins when using com-
pressed air.
* Always apply compressed air from the engine side of
oil cooler. If compressed air is applied from the front
side, dirt will be forced into the pores of oil cooler.
REMOVAL AND INSTALLATION
• Oil cooler (!3-6 and -8)
OIL FILTER
!2-10
OIL PRESSURE
!2-23