• Wireless Setup
NOTE:
•
Wireless Setup is available only when the printer is connected using the wireless network.
Purpose:
To configure the wireless network using WPS.
Values:
Select access
WEP Key
PassPhrase Entry
Manual
Enter (SSID)
Setup
Network
Mode
170
Using the Operator Panel Menus
Infrastructure
Encryption
Type
No Security
Mixed mode PSK
Select the desired access point
from the list, or select Manual
Setup to specify and configure
wireless network manually.
Displayed when the selected
access point uses the security
method of WEP. Specify the
WEP key of 10 or 26
hexadecimal characters.
The transmit key is set to Auto.
Displayed when the selected
access point uses the security
method of WPA-PSK-TKIP or
WPA2-PSK-AES. Specify the
pass phrase of 8 to 63
alphanumeric characters.
Specify a name to identify the
wireless network. Up to 32
alphanumeric characters can be
entered.
Select to configure the wireless
setting through the access point
such as a wireless router.
Specify No Security to
configure the wireless setting
without specifying a security
method from Mixed mode PSK,
WPA-PSK-TKIP,
WPA2-PSK-AES, and WEP.
Specify Mixed mode PSK to
automatically select an available
encryption method from
WPA-PSK-TKIP or
WPA2-PSK-AES.