Table of Contents
Advertisement
Moving the Printer
This section describes how to move the printer.
NOTE:
•
If the optional 550 sheet feeder has been installed, uninstall the optional 550 sheet feeder before moving the printer. If the
optional 550 sheet feeder is not fixed securely to the printer, it may fall to the ground and cause injuries. For details on how to
uninstall the optional 550 sheet feeder, see
1
Turn off the printer and disconnect the power cord, interface cable, and any other cables.
IMPORTANT:
•
If the optional hard disk unit is not installed on your printer, note that the data in the memory are cleared when the printer
is turned off.
2
Remove any paper in the output tray and return the output tray extension.
3
Lift the printer and move it gently.
IMPORTANT:
•
When lifting the machine, make sure to follow the precautions stated in
NOTE:
•
If you move the printer over a long distance, remove the toner cartridges from the printer to prevent toner
from spilling, and pack the printer inside a box.
4
Adjust the color registration before using your printer.
See also:
• "Adjusting Color Registration" on page 231
284
Maintenance
"Removing the Optional 550 Sheet Feeder" on page
288.
"Machine Installation" on page
16.
Advertisement
Table of Contents
