Ip Mode - Fuji Xerox DocuPrint CP405 d User Manual

IP Mode

Purpose:
To configure IP Mode.
Values:
*
Dual Stack
IPv4
IPv6
IPv4
Purpose:
To configure IPv4 settings.
Values:
Get IP Address
IP Address
Subnet Mask
Gateway
Address
• IPsec
NOTE:
• IPsec feature is available only when IPsec is enabled on the CentreWare Internet Services.
Purpose:
Disables IPsec.
172
Using the Operator Panel Menus
Uses both IPv4 and IPv6 to set the IP address.
Uses IPv4 to set the IP address.
Uses IPv6 to set the IP address.
*
DHCP / Autonet Sets the IP address automatically. A random value in the range
of 169.254.1.0 to 169.254.254.255 that is not currently in
use on the network is set as the IP address. The subnet mask is
set as 255.255.0.0.
BOOTP Sets the IP address using BOOTP.
RARP Sets the IP address using RARP.
DHCP Sets the IP address using DHCP.
Panel Use this option when you want to set the IP address manually on
the operator panel.
When an IP address is being set manually, the IP is allocated to
the printer using the format nnn.nnn.nnn.nnn. Each octet that
makes up nnn.nnn.nnn.nnn is a value in the range of 0 to
254. 127 and any value in the range of 224 to 254 cannot be
specified for the first octet of a gateway address.
When an IP address is being set manually, the subnet mask is
specified using the format nnn.nnn.nnn.nnn. Each octet that
makes up nnn.nnn.nnn.nnn is a value in the range of 0 to
255.255.255.255.255 cannot be specified as the subnet
mask.
When an IP address is being set manually, the gateway address
is specified using the format nnn.nnn.nnn.nnn. Each octet
that makes up nnn.nnn.nnn.nnn is a value in the range of 0 to
254. 127 and any value in the range of 224 to 254 cannot be
specified for the first octet of a gateway address.