Table of Contents
Advertisement
Standard 550 Sheet Tray and Optional 550 Sheet Feeder
Paper Size
Paper Type
Loading Capacity
*:XML Paper Specification (XPS) driver does not support custom size paper.
NOTE:
•
SEF indicates the paper feed direction; SEF stands for short-edge feed.
•
For Plain and Label paper, you can set the paper density by selecting Adjust Paper Type (Lightweight or
Heavyweight) under Maintenance Mode from the operator panel. Once you set the Adjust Paper Type settings,
the printer uses the settings for Plain and Label paper.
See also:
• "Loading Print Media in the Standard 550 Sheet Tray and the Optional 550 Sheet Feeder" on page 117
• "Loading Letterhead in the Standard 550 Sheet Tray and the Optional 550 Sheet Feeder" on page 119
• "Loading Print Media in the Bypass Tray" on page 120
• "Loading Envelope in the Bypass Tray" on page 121
• "Loading Letterhead in the Bypass Tray" on page 122
Printing on print media that differs from the paper size or paper type selected on the print driver, or loading print
media into an unsuitable paper tray for printing, may lead to paper jams. To ensure that printing is correctly done,
select the correct paper size, paper type, and paper tray.
×
A4 SEF (210
297 mm)
×
B5 SEF (182
257 mm)
×
A5 SEF (148
210 mm)
×
Letter SEF (8.5
11 inches)
×
Executive SEF (7.25
10.5 inches)
×
Folio SEF (8.5
13 inches)
×
Legal SEF (8.5
14 inches)
*
Custom size
:
Width: 148–215.9 mm (5.83–8.5 inches)
Length: 210–355.6 mm (8.27 –14 inches)
Plain (Lightweight)
Plain (Heavyweight)
Other Type
Lightweight Cardstock
Heavyweight Cardstock
Light Glossy Cardstock
Heavy Glossy Cardstock
Letterhead
Hole Punched
Colored
550 sheets of standard paper
113
Printing Basics
Advertisement
Table of Contents
