Hex Dump; Draft Mode; Image Enhance - Fuji Xerox DocuPrint CP405 d User Manual

• Quantity
Purpose:
To set the default print quantity, within the range of 1 to 999. The default is 1. (Set the number of copies required for
a specific job from the print driver. Values selected from the print driver always override values selected from the
operator panel.)

• Image Enhance

Purpose:
To specify whether to enable the Image Enhance feature, which makes the boundary line between black and white
smoother to decrease jagged edges and enhance the visual appearance.
Values:
Off
*
On

• Hex Dump

Purpose:
To help isolate the source of a print job problem. With Hex Dump selected, all data sent to the printer is printed in
hexadecimal and character representation. Control codes are not executed.
Values:
*
Disable
Enable

• Draft Mode

Purpose:
To save toner by printing in the draft mode. The print quality is reduced when you print in the draft mode.
Values:
*
Disable
Enable
• LineTermination
Purpose:
To add the line termination commands.
Values:
*
Off
Add-LF
Add-CR
CR-XX
Disables the Image Enhance feature.
Enables the Image Enhance feature.
Disables the Hex Dump feature.
Enables the Hex Dump feature.
Does not print in the draft mode.
Prints in the draft mode.
The line termination command is not added.
CR=CR, LF=LF, FF=FF
The LF command is added.
CR=CR-LF, LF=LF, FF=FF
The CR command is added.
CR=CR, LF=CR-LF, FF=CR-FF
The CR and LF commands are added.
CR=CR-LF, LF=CR-LF, FF=CR-FF
Using the Operator Panel Menus
165