Table of Contents
Advertisement
016-923
Press the
setting of WEP key or WPA pass phrase.
016-930
The device is not supported. Remove it from the USB port.
016-931
The USB hub is not supported. Remove it from the USB port.
016-982
Press the
042-700
Wait for a while until the printer cools down.
077-215
Turn off the printer. Confirm that the duplexer is correctly installed, and turn on the printer. Contact
customer support if this failure is repeated.
093-925
Turn off the printer. Confirm the black toner cartridge is correctly installed, and turn on the printer.
093-950
Turn off the printer. Confirm the yellow toner cartridge is correctly installed, and turn on the printer.
093-951
Turn off the printer. Confirm the magenta toner cartridge is correctly installed, and turn on the printer.
093-952
Turn off the printer. Confirm the cyan toner cartridge is correctly installed, and turn on the printer.
116-316
Turn off the printer. Remove the optional 512MB memory from the slot, and then reattach it firmly. Turn
on the printer. Contact customer support if this failure is repeated.
116-317
Turn off the printer, and turn it on again. Contact customer support if this failure is repeated.
116-320
Remove the unsupported additional memory module. Contact customer support if this failure is
repeated.
116-721
Press the
116-722
button, or wait for the time set in Fault Time-out for the printer to recover. Modify the
button, or wait for the time set in Fault Time-out for the printer to recover.
button, or wait for the time set in Fault Time-out for the printer to recover.
Troubleshooting
239
Advertisement
Table of Contents
