Table of Contents
Advertisement
Setting the SSL-use Server Certificate (HTTP/IPP)
NOTE:
•
To manage digital certificates, you must first set encryption of the optional hard disk unit to On, and then set up HTTPS
communication. For details, see
1
Import the certificate to be used with the SSL-use server.
See also:
• "Importing a Digital Certificate" on page 147
2
Set the certificate to be used with the SSL-use server.
See also:
• "Setting a Digital Certificate" on page 148
3
Confirm whether the certificate is set correctly.
See also:
• "Confirming the Settings of a Digital Certificate" on page 149
NOTE:
•
Confirm whether the newly set certificate, not the self-signed certificate, is associated.
4
After restarting the printer, the certificate set as described above is used as the server certificate when
executing communication with HTTP/IPP-SSL/TLS.
Setting LDAP-SSL/TLS Communication
NOTE:
•
This setting is available only when the optional hard disk unit is installed and Data Encryption is set to On.
1
Launch CentreWare Internet Services.
2
Click the Properties tab.
3
In the left navigation panel, scroll down to Security and select SSL/TLS Server Communication.
4
Select the Enabled check box for LDAP-SSL/TLS Communication.
5
Click Apply.
6
After restarting the printer, LDAP-SSL/TLS Communication is enabled.
NOTE:
•
When executing the certificate validity of the server and the presentation of the client certificate, see
Certificate Verification for LDAP-SSL/TLS Communication" on page 153
Communication" on page
152
Printing Basics
"Preparing to Manage Certificates" on page
153.
145.
and
"Setting Client Certificate for LDAP-SSL/TLS
"Setting Server
Advertisement
Table of Contents
