Non-Genuine Mode - Fuji Xerox DocuPrint CP405 d User Manual

Non-Genuine Mode

When toner within a toner cartridge is empty, the Replace XXXX Cartridge (XXXX: Yellow, Magenta, Cyan, or
Black) message appears.
When you want to use the printer in Non-Genuine mode, program the mode and replace the toner cartridge.
IMPORTANT:
• If you use the printer in the Non-Genuine mode, the performance of the printer may not be at its optimum. And any problems
that may arise from the use of the Non-Genuine mode are not covered by our quality guarantee. The continuous use of the
Non-Genuine mode can also cause the printer to break down, and any repair charges for such break down will be incurred by
users.
NOTE:
• Before starting the operation described below, confirm that Ready is displayed on the LCD panel.
1
Press the (Menu) button.
2
Select Admin Menu, and then press the
3
Select Maintenance Mode, and then press the
4
Select Non-Genuine, and then press the
5
Select Toner, and then press the
6
Select On, and then press the
The printer switches to the Non-Genuine mode.
242
Troubleshooting
button.
button.
button.
button.
button.