Table of Contents
Advertisement
PS Settings
Use the PS Settings menu to change printer settings that only affect jobs using the PostScript
language.
NOTE:
•
Values marked by an asterisk (*) are the factory default menu settings.
• PS Error Report
Purpose:
To specify whether to print the contents of PostScript errors.
The change becomes effective after the printer is turned off and then on again.
Values:
Off
On*
NOTE:
•
Instructions from the PS driver override the settings specified on the operator panel.
• PS Job Time-out
Purpose:
To specify the runtime of one PostScript job.The change becomes effective after the printer is turned off and then on
again.
Values:
Off*
On
1 min
1-900 min
• Paper Select Mode
Purpose:
To set the way to select the paper tray for PostScript mode.The change becomes effective after the printer is turned
off and then on again.
Values:
Auto*
Select FromTray
• Output Color
Purpose:
To specify the color mode to Color or Black and White. This setting is used for a print job which does not specify a
print mode.
Values:
Color*
Black and White
168
Using the Operator Panel Menus
Discards the print job without printing an error message.
Prints an error message before it discards the job.
Job time-out does not occur.
A PostScript error occurs if processing is not completed after the specified
time.
The tray is selected as the same setting as in the PCL mode.
The tray is selected in a method compatible with regular PostScript printers.
Prints in color mode.
Prints in black and white mode.
®
emulation printer
Advertisement
Table of Contents
