Fuji Xerox DocuPrint CP405 d User Manual page 106

Manual SSID Setup
1
Press the (Menu) button.
2
Select Admin Menu, and then press the
3
Select Network Setup, and then press the
4
Select Wireless Setup, and then press the
5
Select Manual Setup, and then press the
6
Enter the SSID, and then press the
7
Select the network mode from Infrastructure and Ad-hoc depending on your environment, and then
press the button.
When you select Infrastructure, proceed to step 8.
When you select Ad-hoc, proceed to step 9.
8
Select the encryption method from Mixed mode PSK, WPA-PSK-TKIP, WPA2-PSK-AES, WEP, and then press
the button.
IMPORTANT:
• Be sure to use one of the supported encryption methods to protect your network traffic.
To use Mixed mode PSK, WPA-PSK-TKIP, or WPA2-PSK-AES encryption:
Select the desired encryption method.
a
Enter the pass phrase in the PassPhrase Entry text box, and then press the
b
To use WEP encryption:
Select WEP(64Bit), WEP(128Bit), and then press the
a
Enter the WEP key, and then press the
b
Select the desired transmit key from Auto or WEP Key 1 to WEP Key 4, and then press the
c
The Restart Printer to apply setting message appears.
Proceed to step 10.
9
Select WEP and then press the
IMPORTANT:
• Be sure to use one of the supported encryption methods to protect your network traffic.
Enter the WEP key, and then press the
a
Select the desired transmit key from WEP Key 1 to WEP Key 4, and then press the
b
The Restart Printer to apply setting message appears.
10
Turn off the printer, and turn it on again to apply the settings.
Wireless settings are correctly configured.
IMPORTANT:
• If the optional hard disk unit is not installed on your printer, note that the data in the memory are cleared when the printer
is turned off.
106
Printer Connection and Software Installation
button.
button.
button.
button.
button.
button.
button.
button.
button.
button.
button.
button.