Configure Your Machine For A Wireless Network Using The One Push Method Of Wi-Fi Protected Setup ™ (Wps) - Fuji Xerox DocuPrint P385 dw User Manual

Home > Network > Additional Methods of Configuring Your Fuji Xerox Machine for a Wireless Network
Configure Your Machine for a Wireless Network Using the One Push Method of Wi-Fi Protected Setup
Configure Your Machine for a Wireless Network Using the One Push
Method of Wi-Fi Protected Setup
Related Models:DocuPrint P385 dw/DocuPrint P375 dw
If your wireless access point/router supports WPS (Push Button Configuration), you can use WPS from your
machine's control panel menu to configure your wireless network settings.
Routers or access points that support WPS are marked with this symbol:
1. Press ▲ or ▼ to select the [Network] option, and then press OK.
2. Press ▲ or ▼ to select the [WLAN] option, and then press OK.
3. Press ▲ or ▼ to select the [WPS] option, and then press OK.
4. When [WLAN Enable?] appears, press ▲ to select On.
This will start the wireless setup wizard. To cancel, press Cancel.
5. When the LCD displays [Press Key on rtr], press the WPS button on your wireless access point/router.
Press ▲ on the machine's control panel. Your machine will automatically detect your wireless access point/
router and try to connect to your wireless network.
If your wireless device is connected successfully, the machine's LCD displays [Connected].
You have completed the wireless network setup. To install drivers and software necessary for operating your
device, insert the Fuji Xerox installation disc to your computer or go to the download page for your model on the
Fuji Xerox website at http://www.fujixerox.com.
Related Information
• Additional Methods of Configuring Your Fuji Xerox Machine for a Wireless Network
Related Topics
• Wireless LAN Report Error Codes
™ (WPS)
>
™
(WPS)
86