Lcn Connections; Mau Connection - Honeywell T5810XL Planning, Installation And Service Manual

Chapter 4 - Operation
ATTENTION
The revision of the LCNP4E firmware must be revision "J" or greater.
There are no constraints on the LCNP4E2 firmware revision.
4.2.3

LCN connections

The LCN Cable A and Cable B connections are made through a single cable from the LCNP4M board
to the LCN Media Access Unit (MAU) contained in a metal housing. The following illustrates a LCN
MAU to LCN cabling.
4.2.4

MAU connection

Connect the MAU to both Cable A and Cable B coax T-connector as illustrated in the following Figure.
Figure 4.1 Connect the MAU to Cable A and Cable B
- 65 -