Preparation (Setting Parameters) - A&D HV-60KGL-WP Instruction Manual

Caution
The parameters of the upper limit value (HI) and a final value (HI) use the
same memory. The parameters of the lower limit value (LO) and the zero band
(LO) use the same memory.
The upper/lower comparator function, the simple batch function and the
full/dribble batch function can not be used at the same time because these
parameters use common memory.

13.1. Preparation (Setting Parameters)

Step 1 Turn off the display.
Press the
and held. F1 is displayed.
Step 2 Press the
Step 3 Select a parameter of 8 for the simple batch function
with the
Step 4 Press the
Step 5 Press the
function table. The scale returns to the weighing
mode.
key while the
ON/OFF
key repeatedly to display F6.
ENTER
key.
∧
key to store the new parameter.
ENTER
key and the
F ENTER
key is pressed
ZERO
key to exit from the
Page 38 HVG-WP Series