Display And Symbols - A&D HV-60KGL-WP Instruction Manual

6.1. Display and Symbols

Display and Symbols
60
60 30
Weighed mass value
Stability indicator.
Indicates the stability status of the weight display.
Symbol is lit when the display is stable.
Zero indicator.
Indicates true center of zero of the weight indication.
Net indicator.
Indicates a tare value has been entered and that the
weight displayed is a net value.
Preset tare indicator.
Indicates a preset tare has been entered.
Accumulation indicator.
Indicates the accumulation function is in use.
Ready indicator.
Used with the full/dribble feed batching function.
ON
OFF
Blinking
The comparator indicator.
Using the comparator function and comparing a
weighing value with the upper and lower limits, the
result is indicated.
Using the full/dribble batch function, the full flow
gate indicator is OK, the dribble flow gate indicator
is HI and the zero band indicator is LO.
The weighing range indicator for the HV-WP series.
15
The current range is indicated.
Example. Display of zero (zero point).
With nothing on the weighing pan and pressing
the
ZERO
The zero point mark is displayed.
The stability mark is displayed.
Example. Display of the counting mode.
This mode uses the registered unit mass, and counts
the amount of articles on the weighing pan. The unit is
.
Page 12
Meaning
Weight within zero band and ready to batch.
weight is outside the zero band.
The start or end of the full/dribble batch
process above the zero-band.
key, this mark is displayed.
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
HVG-WP Series