A&D HV-60KGL-WP Instruction Manual page 36

Caution
The comparison of the full/dribble batch function is a one way sequence (not
reversible). If the display value becomes less than the final value after the
value reached a predetermined target value, neither HI or LO is on.
The parameters of the upper limit value (HI) and the final value (HI) use the
same memory. The parameters of the lower limit value (LO) and the zero band
(LO) use the same memory.
The upper/lower comparator function, the simple batch function and the
full/dribble batch function can not be used at the same time because these
parameters use common memory.
Set the zero band greater than the tare value.
Operation
Pressing the SET key and start the batch process.
If selecting a parameter of 0 or 2 for F10, the F key acts as the finish input.
Parameter List and Word Definition
The term "gross" is a total weighing value where the tare value is not subtracted.
The term "net" is a measurement value with the tare value subtracted from the gross.
The term "zero band" is the zero detection level.
The term "zero point" is the fundamental starting point to weigh anything.
Comparator
Function table
f6 9
Full/dribble batch sub-function
Function table
f10 0
f10 1
f10 2
f10 3
Hold
Function table
f12 0
Full/dribble batch function.
Reaching final value and pressing the
finished.
Reaching final value and displaying the stability mark, the current
process is finished automatically.
Pressing the
SET
full/dribble batch process. Reaching final value and pressing the
key, the current process is finished.
Pressing the
SET
full/dribble batch process. Reaching final value and displaying the
stability mark, the current process is finished.
The hold function is not used.
Page 34
Meaning and purpose
Meaning and purpose
key, the scale automatically tares and starts the
key, the scale automatically tares and starts the
Meaning and purpose
key, the current process is
F
HVG-WP Series
A
A
A
A
A
A
A
A
A
F
A
A
A
A
A
A