Names - A&D HV-60KGL-WP Instruction Manual

Step 8 Removing the column from the base unit,
Step 9 Wind the cable through the ferrite core two times.
Affix the cable to the rear cover using the cable
clamp.
Step 10 Connect the cable to the connnector. Close the
rear cover.
Step 11 Confirm the accuracy of the scale.

6. Names

Display Unit
Knob for angle adjstment
Pole
Pan (Weighing Pan)
Leveling Foot
Base Unit
Page 10
Screw and O ring
Connector
Ferrite core
Wind up 2 times
Loadcell cable
HVG-WP Series
Cable clamp