Keys - A&D HV-60KGL-WP Instruction Manual

Display and Symbols
CAP. MAX. 15/30/60kg
d=5/10/20g

6.2. Keys

Display and Symbols
An error where the weighing value is unstable due to
drift, vibration or other, when turning on the scale.
Check around the weighing pan.
Check the connection of load cell cable.
Remove anything that may be on the weighing pan.
Check around weighing pan.
Perform zero point calibration of the scale.
Error indication.
Refer to "19
Accumulated data count.
Total mass value of the accumulated data.
Comparator function, display is an upper limit.
Full/dribble batch function, the display is a final value.
Full/dribble batch function, the display is a preliminary
value.
Comparator function, display is a lower limit.
Full/dribble batch function, the display is the zero band.
Description of the weighing unit, weighing range and
measurable minimum mass.
Display ON/ OFF key.
Note Standby status when power is connected.
Zero key.
When there is nothing on the weighing pan and the
is pressed, the scale displays the mass value of zero and the
zero point mark. Net is canceled, if it is displayed.
Tare key.
Canceling the mass of a receptacle, case, bag, etc. which is
put on the weighing pan, and does not weigh its mass.
Range key, Sample key.
Changing weighing range for HVG-WP series.(Refer to
f2 )
Storing the unit mass, it is used to select a sample number.
In the function table, it is used to select a parameter.
Page 14
Meaning
".
Maintenance
Meaning
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
key
ZERO
A
A
A
A
A
A
A
A
A
HVG-WP Series