A&D HV-60KGL-WP Instruction Manual page 23

Explanation
The status of "Inactive comparator (F6)" is that comparator function (F6 0, F6 2, F6 4, F6
6) is selected and the comparator is not used. The "active" or "Inactive" (ON/OFF) for the
comparator can be selected by pressing the SET key alternately.
The following parameters are stored in the same memory. Therefore, the functions
can not be used at the same time. If you use each function, it will be necessary to
reselect the function from the function table and to set the parameters of HI,OK and
LO for each application.
Upper/Lower Comparator Function (f6 0 ~ 7) Upper limit
Simple Batch Function (f6 8)
Full/ Dribble Batch Function (f6 9)
HVG-WP Series
Memory address / Indicator and Output
HI
Final value
Final value
Page 21
OK LO
Lower limit
Preliminary
Zero band
value
Preliminary
Zero band
value