Preparation (Setting Parameters) - A&D HV-60KGL-WP Instruction Manual

f8 5

10.1. Preparation (Setting Parameters)

Step 1 Turn off the display.
Press the
pressed and held. The function table is displayed.
Step 2 Press the
displayed.
Step 3 Select a parameter for the accumulation function
(
f8 1
Step 4 Press the
Press the
the function table. Then the scale returns to the
weighing mode.
.
HVG-WP Series
automatically. The next accumulation can be performed after the
display is near-zero.
Use Recording the number and mass of articles removed form
the weighing pan. (Put the articles on the weighing pan.
Press the
At each finish of the full/dribble batch function, the scale accumulates
the data automatically.
Use Packaging articles like a powder, it is used for recording the
bag number and total mass.
key while the
ON/OFF
key to repeately until F8 is
ENTER
~ ) with the
f8 4
key to store the new parameter.
ENTER
key and the
F ENTER
key at each removal.)
TARE
key is
ZERO
key.
∧
key to exit from
Page 27
A
A
A
A
A
A
A
A