Operation And Performance (Examples) - A&D HV-60KGL-WP Instruction Manual

11.2. Operation and Performance (Examples)

Example 1
This example is set as follows:
Function table
Upper limit value (HI)
Lower limit value (LO)
Performance
The comparison starts at turning the scale on.
When the current value is less than 6.500kg, LO is displayed.
When the current value is 6.500kg to 7.000kg, OK is displayed.
When the current value is greater than 7.000kg, HI is displayed.
Example 2
This example is set as follows:
Function table
Upper limit value (HI)
Lower limit value (LO)
Performance
Pressing the
mark.
When the current value is less than -1.000kg, LO is displayed.
When the current value is -1.000kg to 2.000kg, OK is displayed.
When the current value is greater than 2.000kg, HI is displayed.
f6 3
7.000kg
6.500kg
f6 4
2.000kg
-1.000kg
key, the comparison is performed after displaying the stability
SET
(The comparator is permanently activated and
compares all values except those near zero.)
(The comparator can be activated and
deactivated by pressing the SET key which
provides the weight display is stable.)
Page 32 HVG-WP Series