A&D HV-60KGL-WP Instruction Manual page 48

"#" factory settings. The "nearly-zero" is within ±4 digits from zero point in the unit of kg.
Item Display
Comparator
f6 5
f6 6
f6 7
f6 8
f6 9
f7 0 # No buzzer.
f7 1
f7 2
Buzzer
f7 3
f7 4
f7 5
f7 6
f7 7
f7 8
f8 0 # Accumulation function not used.
f8 1
Accumula-
f8 2
tion func-
tion
f8 3
f8 4
When the weight value becomes stable, the scale compares the
display value. It does not compare on an unstable condition.
When the display value becomes stable when not nearly-zero
after pressing the
SET
does not compare on an unstable condition. If the
pressed again, the scale stops the comparison.
When the display value becomes stable when not nearly-zero,
the scale compares the value.
Simple batch function. (Refer to section 13.)
Full/dribble batch function. (Refer to section 12.)
The condition of the buzzer on option OP-03 by comparator
function or full/dribble batch function.
The buzzer sounds at LO.
The buzzer sounds at OK.
The buzzer sounds at LO and OK.
The buzzer sounds at HI.
The buzzer sounds at LO and HI.
The buzzer sounds at OK and HI.
The buzzer sounds at LO, OK and HI.
The buzzer sounds at finishing the full/dribble batch process.
The condition of the accumulation function
The scale accumulates the data, if the
display becomes a positive stable value and not nearly-zero. The
next accumulation can be performed after the display becomes
nearly-zero or a negative value.
The scale accumulates the data, if the
display becomes a stable value and not nearly-zero. The next
accumulation can be performed after the display becomes
nearly-zero.
When the display is a positive stable value and not nearly zero, the
scale accumulates the data automatically. The next accumulation can
be performed after the display becomes nearly-zero or a negative
value.
When the display becomes a stable value and not nearly zero, the
scale accumulates the data automatically. Next accumulation can
be preformed after the display becomes nearly-zero.
Use recording number and mass of articles removed form the
weighing pan. (Place the articles on the weighing pan. Press
key at each removal.)
Page 46
Description
key, the scale compares the display value. It
key is pressed, when the
F
key is pressed, when the
F
Ａ
A
A
A
A
key is
SET
A
A
A
Ａ
Ａ
Ａ
Ａ
Ａ
Ａ
Ａ
Ａ
Ａ
Ａ
Ａ
Ａ
Ａ
Ａ
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
TARE
A
HVG-WP Series