Operation And Performance (Examples) - A&D HV-60KGL-WP Instruction Manual

Step 6 Press the
final value).
Step 7 Set the final value using the following keys.
key
∧
key
＜
Step 8 Press the
display the blinking OK (of preliminary value).
Step 9 Set the preliminary value using the following keys.
key
∧
key
＜
Step 10 Press the
display the blinking LO (of zero band).
Step 11 Set the zero band using the following keys.
key
∧
key
＜
Step 12 Press the
return to the weighing mode.

13.2. Operation and Performance (Examples)

Step 1 Select the parameter
Step 2 Set the parameters of the final value, preliminary value and zero band.
Step 3 The comparison result is always displayed.
HVG-WP Series
key to display the blinking HI (of the
MODE
Adjusts the value of a figure.
Selects a figure.
key to store the new parameter and
ENTER
Adjusts the value of a figure.
Selects a figure.
key to store the new parameter and
ENTER
Adjusts the value of a figure.
Selects a figure.
key to store the new parameter and
ENTER
f6 8
of the function table.
Page 39