A&D HV-60KGL-WP Instruction Manual page 15

Display and Symbols
Fixed value
The " nearly-zero " is within ±4 digits from zero point in the unit of kg.
HVG-WP Series
Example. Storing the unit mass of the counting mode.
This is a display of zero point for the counting mode and
uses 20 pieces for the registration.
Example. Storing the unit mass of the counting mode.
The sign "-" means "weighing value is not zero".
Sample number is 10 pieces.
Example. Percentage mode.
This mode uses the registered 100% mass, and converts
the weighing value to a percentage. The unit is %
Example. Display of the function table.
This function table sets parameters of items.
＜ key
∧ key
key
ENTER
Example. Preset tare. Entering tare with digital input.
＜ key
∧ key
key
ENTER
Example. Hold display
The hold display is set using f12 of the function table.
When the value is "nearly-zero" or changes more than
25% +30 digits, the hold is canceled.
Over load display.
Remove the mass from the weighing pan.
Weighing error.
Check the base unit and weighing pan.
Calibration error.
The calibration mass is too light.
Check the base unit and weighing pan.
Calibration error.
The calibration mass is too heavy.
Check the base unit and weighing pan.
Page 13
Meaning
Selecting an item.
Selecting the parameter of an item.
Storing new parameters.
Selecting a figure.
Selecting a number.
Storing a new tare.
6.1. Display and Symbols
A
A
A
A
A
A
A
A
A
A
A
A
.
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A