Ghosting (4) - Xerox Phaser 3140 Service Manual

Print-Quality Troubleshooting

Ghosting (4)

Initial Actions
5-18
There is ghosting at 75.3mm intervals. Fuser operating temperature is too high.
• Ensure there is no debris in the Fuser.
• Verify the paper is within the printer specifications (refer to "Media and Tray
Specifications" on page 1-16).
Troubleshooting Reference Table
Applicable Parts
Fuser, PL9.0
Warning
Allow the Fuser to cool before starting the procedure.
Troubleshooting Procedure Table
Step Actions and Questions
1 Remove and disassemble the Fuser
(page 8-11). Remove contaminated
toner particles on the roller, and
clean any foreign matter between
the Thermistor and Heat Roller.
NOTE If the Heat Roller is deformed, replace
it (page 8-17).
Does the problem persist?
Example Print
Digital Printer
Digital Printer
Digital Printer
Digital Printer
Digital Printer
Digital Printer
Yes
Replace the
Fuser
(page 8-11).
Phaser 3140/3155/3160 Printer Service Manual
No
Complete.