Adjustments and Calibrations
Adjustments
Altitude
Specifications
Making Altitude Adjustments
6-2
Print quality is affected by atmospheric pressure, which varies by altitude. The
following information contains instructions and specifications for adjusting
altitude information for the Phaser 3140/3155/3160.
Note
Verify the Phaser 3140/3155/3160 printer driver has been installed.
Prior to performing the altitude adjustment procedure, determine the altitude
location of the printer and the appropriate value to be adjusted for the printer.
4,000 m
3,000 m
2,000 m
1,000 m
For Phaser 3160
1. From the Start menu, select Programs > Xerox Phaser 3160 > Printer
Settings Utility.
2. On the left column, select Setting.
3. On the right column, select Altitude Adjustment.
4. On the Altitude Adjustment pull-down menu, select the appropriate altitude
setting for the printer.
5. Click the Apply button to change the altitude information.
6. Click the Exit button to close the Printer Settings
Value
High 1
High 2
High 3
Normal
Utility
Phaser 3140/3155/3160 Printer Service Manual
s3160-067
window.