Common Postscript Problems - Xerox Phaser 3140 Service Manual

General Troubleshooting

Common PostScript Problems

4-20
The following errors are PostScript language specific that may occur when multiple
printer languages are being used.
Note
To receive a printed or screen displayed message when PostScript errors occur,
open the Print Options window and click the appropriate selection next to the
PostScript errors section.
Condition
PostScript file does not
print.
"Limit Check Error"
message is displayed.
A PostScript error page
prints.
When printing a
document using a
Macintosh with Acrobat
Reader 6.0 or higher,
colors print incorrectly.
Possible Cause Solutions
The PostScript driver
may not be installed
correctly.
The print job was too Change the complexity of
complex. the print job.
Print job may not be Make sure that the print job
PostScript. is a PostScript job. Check
whether the software
application expected a setup
or PostScript header file to
be sent to the printer.
The resolution setting Make sure that the
in the printer driver resolution setting in your
may not be matched printer driver matches
with that in Acrobat information in Acrobat
Reader. Reader.
Phaser 3140/3155/3160 Printer Service Manual
Print a Configuration page
and verify that the
PostScript version is
available for printing.
Install the PostScript
driver.