Paper Jam 1 - Xerox Phaser 3140 Service Manual

Error Messages and Codes

Paper Jam 1

Initial Actions
3-10
Troubleshooting Procedure Table (Continued)
Step Actions and Questions
7 Check the Pick Up Roller for damage
or debris.
Is the Pick Up Roller damaged?
8 Check the Feed Actuator for
damage.
Is the Feed Actuator damaged?
9 Replace the Power Supply Board
(page 8-54).
A Jam 1 occurs when the jam is located in front of or inside of the Fuser, or the
media is stuck at the Exit Roller in the Fuser just after passing through the Feed
Actuator.
• Check the paper path for obstructions or debris.
• Cycle printer power.
• If the problem persists, refer to the following procedure.
Yes
Clean or
replace the Pick
Up Roller
Assembly
(page 8-9). If
the problem
persists, go to
step 8.
Replace the
Feed Actuator
(page 8-40). If
the problem
persists, go to
step 9.
Complete.
Phaser 3140/3155/3160 Printer Service Manual
No
Go to step 8.
Go to step 9.
s3160-072