Table of Contents
Advertisement
Passive mode: set whether you use the passive mode of FTP server or not when
Passive mode: set whether you use the passive mode of FTP server or not when
Passive mode: set whether you use the passive mode of FTP server or not when
connecting to FTP server. Select [ON] to connect to FTP server using the passive mode.
connecting to FTP server. Select [ON] to connect to FTP server using the passive mode.
connecting to FTP server. Select [ON] to connect to FTP server using the passive mode.
8.1.2. Alarm Sending
8.1.2. Alarm Sending
8.1.2. Alarm Sending
Set to forward the image file to the specified FTP server linked with the alarm detection by
Set to forward the image file to the specified FTP server linked with the alarm detection by
Set to forward the image file to the specified FTP server linked with the alarm detection by
the built-in motion detection function. Select [ON] to send the image file to an FTP server linked
the built-in motion detection function. Select [ON] to send the image file to an FTP server linked
the built-in motion detection function. Select [ON] to send the image file to an FTP server linked
with the alarm detection (Pic. 8.2).
with the alarm detection (Pic. 8.2).
with the alarm detection (Pic. 8.2).
Remote Path: type the path to the destination to FTP server up to 64 characters.
Remote Path: type the path to the destination to FTP server up to 64 characters.
Remote Path: type the path to the destination to FTP server up to 64 characters.
Image File Name: type the file name you want to assign to the images when sending to the
Image File Name: type the file name you want to assign to the images when sending to the
Image File Name: type the file name you want to assign to the images when sending to the
FTP server. You can use up to 10 alphanumeric characters, - (hyphen) and _ (underscore) for
FTP server. You can use up to 10 alphanumeric characters, - (hyphen) and _ (underscore) for
FTP server. You can use up to 10 alphanumeric characters, - (hyphen) and _ (underscore) for
naming.
naming.
naming.
Suffix: select a suffix to add to the file name.
Suffix: select a suffix to add to the file name.
Suffix: select a suffix to add to the file name.
•
•
•
Date & time: the date & time suffix is added to the Image file name. The date/time
Date & time: the date & time suffix is added to the Image file name. The date/time
Date & time: the date & time suffix is added to the Image file name. The date/time
suffix consists of lower two-digits of year (2 digits), month (2 digits), date (2 digits), hour
suffix consists of lower two-digits of year (2 digits), month (2 digits), date (2 digits), hour
suffix consists of lower two-digits of year (2 digits), month (2 digits), date (2 digits), hour
(2 digits), minute (2 digits), second (2 digits), and consecutive number (2 digits), thus
(2 digits), minute (2 digits), second (2 digits), and consecutive number (2 digits), thus
(2 digits), minute (2 digits), second (2 digits), and consecutive number (2 digits), thus
14-digit number is added to the file name.
14-digit number is added to the file name.
14-digit number is added to the file name.
•
•
•
Sequence number: a consecutive number of 10 digits between 0000000001 and
Sequence number: a consecutive number of 10 digits between 0000000001 and
Sequence number: a consecutive number of 10 digits between 0000000001 and
4294967295 and two fixed digits 00 is added to the Image file name.
4294967295 and two fixed digits 00 is added to the Image file name.
4294967295 and two fixed digits 00 is added to the Image file name.
•
•
•
Sequence number clear: click [Clear] and the suffix of the sequence number returns
Sequence number clear: click [Clear] and the suffix of the sequence number returns
Sequence number clear: click [Clear] and the suffix of the sequence number returns
to 1.
to 1.
to 1.
Alarm
Alarm
Alarm
•
•
•
Motion Detection: click it for using Motion Detection function as a sensor. You can set
Motion Detection: click it for using Motion Detection function as a sensor. You can set
Motion Detection: click it for using Motion Detection function as a sensor. You can set
motion detection function at the motion detection function page.
motion detection function at the motion detection function page.
motion detection function at the motion detection function page.
N6601 Operations User Manual
N6601 Operations User Manual
N6601 Operations User Manual
Chapter 8. Setting-Advance menu
Chapter 8. Setting-Advance menu
Chapter 8. Setting-Advance menu
Pic. 8.2
Pic. 8.2
Pic. 8.2
43
43
43
Hide quick links:
Advertisement
Table of Contents
