Table of Contents
Advertisement
NOTE:
To enable and configure the UPnP option on your router, please, refer to its user manual.
IMPORTANT:
Some routers do not support UPnP to forward LAN and WAN ports. Make sure your router supports this
option.
8.2.3. Bonjour
This section allows you to enable "Bonjour" protocol. After this option is enabled, it allows
the IP cameras to be automatically discovered using this protocol.
NOTE:
"Bonjour" is a protocol of auto identification which is used in local networks to identify other network devices.
Now, it is a basic service for auto searching for Mac OS X from 10.2 version.
Bonjour: select [On] to turn on this function or select [Off] to turn it off (Pic. 8.13).
Device Name: type a device name to discover the camera in the Internet (Pic. 8.13).
NOTE:
Go to
www.apple.com
N300 Operations User Manual
for detailed information about using Bonjour for OS Windows.
Chapter 8. The [SETTING] Menu: Network
Pic. 8.13
40
Advertisement
Table of Contents
