Language; Date/Time - Beward N37210 Owner's Manual

IMPORTANT:
When the update is completed, it is recommended to reset camera settings to their factory defaults.
NOTE:
When the firmware is upgraded, all settings restore to their defaults. Before you start upgrading the
firmware, it is recommended to perform a backup of camera settings.
When the update is completed, the camera automatically restarts.
IMPORTANT:
Do not switch off the camera and do not close a browser's window till process completing. Process
interrupting may cause a device failure.
IMPORTANT:
Be careful when you update camera firmware. Make sure that you use only the firmware designed for your
IP camera. Using the wrong firmware file may cause your camera to become inoperable. The
manufacturer is not liable for the incorrect firmware update. Do not disconnect your camera until the
update is completed.

7.1.4. Language

This menu allows you to change the web interface language by uploading a language file
pack.
NOTE:
The language pack files are on the disk included in the package contents.
IMPORTANT:
Be careful when you uploading a language pack. Make sure that you use only the language pack
designed for your IP camera. Using the wrong language pack may cause your camera to become
inoperable. The manufacturer is not liable for the incorrect loading of a language pack.

7.2. Date/Time

This menu allows you to set device date and time and consist of several settings groups,
which are [Current Date/Time], [Synchronization Method] and [Time zone].
N37210 Operations User Manual
Chapter 7. The [SETTING] Menu: System
Pic. 7.4
24