Tadiran Telecom T207M User Manual page 40

Upon Hearing Ringback Tone
After dialing an external destination number, the following features appear on your phone display when you hear the ringback
tone. Wait for an answer or press one of the soft keys to activate the required feature.
NOTE! The availability of some of the soft keys depends on the infrastructure on the external side.
or Transfer / Flash passes your call to another destination. Pressing
[Trns] [Flsh]
Dial a number (internal or external), and disconnect to transfer the call, or first announce the call and then
disconnect. See
Conference can be activated to establish a 3-way call
[Conf]
Disconnect. Use this feature to reject the call.
[Dsct]
Hold places the active call on hold. See
[Hold]
or MUTE Mute can be activated during ringback so that when the call is answered your side of the conversation is
[Mute]
muted and the called party will not hear you. When this feature is activated by the
toggle switch, a bullet appears to the left of
microphone for your speakerphone and handset and silences the ringer. Press the toggle key again to
reactivate the microphone.
Operating the Phone
Making External Calls
Answer outside telephone number
↓→ Dsct
Hold
Transfer (Xfer) on page 82
Hold on page 62
Trns Conf
[Trns]
.
. See Transfer: 3-Way Conference on page
.
and MUTE LED is lit red. The mute feature deactivates the
[Mute]
32 T200M Series User Guide (Coral Sea Softswitch)
or places the called party on Hold.
[Flsh]
or MUTE on/off
[Mute]
84.