Tadiran Telecom T207M User Manual page 75

To place a Call-through Mobility call from an off-site phone:
1. Place a call to your dedicated Mobility number.
NOTE! If your ANI number is not recognized or you do not have a PIN code defined in the system you will
hear an announcement indicating that you are not authorized to use this Mobility service.
2. Listen for dial tone.
3. Dial your PIN code (if required by your authentication rules or if your phone does not present your ANI number).
NOTE! If you enter an invalid PIN code you will hear an announcement to enter the correct PIN code. If
you are not sure what your PIN code is, contact your system administrator.
4. Press #, and then listen for dial tone.
5. Place a call to the required destination number.
NOTE! If your destination is an external number, it should be preceded by an external line access code.
Depending on your settings, your off-site phone ANI or alias is displayed to the party receiving the
call.
6. Listen for the ringback tone.
7. Wait for an answer.
8. Once in an established Call-through call, you can activate one of the options described in the table on
Station Telephony Features
Mobility: Call-through, Callback
67 T200M Series User Guide (Coral Sea Softswitch)
.
page 69