Tadiran Telecom T207M User Manual page 76

To place a Callback Mobility call from an off-site phone:
1. Place a call to your dedicated Mobility number.
2. Listen for dial tone if your authentication rule requires a PIN code; otherwise, wait for ringback tone and proceed to
Step
4.
3. Dial your PIN code.
NOTE! If you enter an invalid PIN code you will hear an announcement to enter the correct PIN code. If
you are not sure what your PIN code is, contact your system administrator.
4. Press #. The call is disconnected.
5. Wait for the system to call you back.
NOTE! You can receive another call before the system calls you back; in this case, the system will
continually attempt to establish the Callback call according to a pre-defined Reattempt rule.
6. Answer the call from your Callback phone, as defined by your system administrator.
7. Listen for the distinctive dial tone.
8. Place a call to the required destination number.
NOTE! If your destination is an external number, it should be preceded by an external line access code.
Depending on your settings, your off-site ANI or alias is displayed to the party receiving the call.
9. Listen for the ringback tone.
10. Wait for an answer.
11. Once in an established Callback call, you can activate one of the options described in the table on
Station Telephony Features
Mobility: Call-through, Callback
68 T200M Series User Guide (Coral Sea Softswitch)
.
page 69