Table of Contents
Advertisement
A surround sound* setup with
BeoVision Avant is easy to fit into
your living room. Determine your
ideal listening and viewing position
by the picture rather than by the
sound. The performance of your
speakers is unaltered.
Measure and preset the distances to
each speaker from your favourite
listening and viewing position. The
surround sound experience will be
noticeable as long as you stay within
the area created by the speakers.
In a surround sound setup, you will
have to perform a speaker balance
calibration. This entails presetting the
sound balance between the speakers
in your particular setup. Refer to the
following pages for further
instruction.
*NOTE! This function is only available if your
BeoVision Avant is equipped with the surround
sound module.
Loudspeaker connections – surround sound
Placing loudspeakers
It is important that you find out where you
wish to place your loudspeakers before you
connect the speakers. Once they are
connected, you can make the presets
necessary to give you the ultimate sound
experience.
The following guidelines apply for all speaker
setups:
– The best placement for the rear speakers is on
either side behind your favourite listening
position.
– The front and rear sets of speakers do not
necessarily have to be placed in the corners of
the room.
– We recommend that you use your most
powerful speakers as your front speakers.
– If you connect a BeoLab 2 subwoofer, refer to
the subwoofer's own Guide for information
about placement possibilities.
The three diagrams above show examples of
BeoVision Avant and loudspeakers placed in various
types and sizes of rooms.
9
Advertisement
Table of Contents
