Table of Contents
Advertisement
Equipment you can connect to each socket
V.TAPE
V.Tape... for a Bang & Olufsen video tape
recorder
STB(SAT), STB(V.AUX)... for a set-top box
None... if nothing is connected
AV
STB(SAT), STB(V.AUX)... for a set-top box.
Choose STB(SAT) if you have a secondary
set-top box connected to the DECODER socket
V.AUX... for other equipment
Non B&O V.Tape2... for a non-Bang & Olufsen
video tape recorder
V.Tape2... for a Bang & Olufsen video tape
recorder
S-VHS V.TP2... for a Super-VHS video tape
recorder
Decoder(2)... for a second decoder. Attach your
primary decoder to the DECODER socket
None... if nothing is connected
DECODER
Decoder(1)... for a primary decoder or expander
box
STB(SAT), STB(V.AUX)... for a set-top box.
Choose STB(V.AUX) if you have a primary
set-top box connected to the AV socket
V.AUX... for other non-Bang & Olufsen
equipment
Non B&O V.Tape2... for a non-Bang & Olufsen
video tape recorder
None... if nothing is connected
STB (V.AUX)
1 SELECTOR
2 NOKIA 9800S/02S
3 NOKIA 9602S
4 NOKIA 9820T
5 NOKIA 9200
6 NOKIA D-BOX II
7 NOKIA D-BOX
8 NOKIA 9850T
9 PACE DTR730-IM
10 PHILIPS DTX637x
11 PACE DSR600
12 SKY DIGITAL
13 CANALdig DK/S/N
14 CANAL+ SAT r2
15 CANALdigital I
16 CANALdigital E
17 CANALdigital NL
18 CANALdigital B+
19 MACAB DCB-101
If you select STB in the 'Connections' menu, you
will be prompted to choose your STB type from a
list on the screen.
If you have connected a set-top-box...
The set-top box options only appear if your
BeoVision Avant is equipped with the built-in
Set-top Box Controller module. Two set-top boxes
can only be connected to BeoVision Avant if your
BeoVision Avant does not have the built-in satellite
receiver module. If your AV socket is in use, you
can connect a second set-top box to the
CamCorder socket. Please refer to the chapter The
close-up socket panel for more information.
> Press
to move down the list.
▼
> Press GO to select your STB type.
Get access to extra equipment
> To switch on a connected video tape recorder,
press V TAPE on Beo4.
> To switch on a second connected video tape
recorder, press LIST on your Beo4 remote
control until V.TAPE2 is shown in the Beo4
display, and then press GO.
> If you wish to gain access to your set-top box
functions and your BeoVision Avant is not
equipped with the built-in satellite receiver
module, press the SAT button on Beo4.
Otherwise, press LIST on Beo4 until V.AUX is
shown in the display, and then press GO.
> For all other external equipment, press LIST on
Beo4 until V.AUX is shown in the display, and
then press GO. This equipment can not be used
if your set-top box is registered as STB(V.AUX).
In order to display V.AUX or V.TAPE2 on Beo4,
these options must be added to the Beo4 list of
functions. Please refer to the chapter 'Gain access
to extra functions via Beo4' on page 34, for more
information.
21
Advertisement
Table of Contents
