BEOVISION Avant DVD Reference Book page 12

12
Calibrate the sound level
When you have connected the necessary
speakers in a surround sound setup to the
BeoVision Avant, you will have to perform a
speaker calibration.
A calibration sound is produced alternately in
each of the speakers you have connected in
your surround sound setup. Your task is to
adjust the sound level from all the connected
speakers to match the sound level from Avant
DVD's own speakers. You can choose whether
you want the sound sequence to occur
automatically or manually. Your Avant DVD is
set for manual sound reproduction, but you
can start the automatic sound sequence by
pressing MENU on Beo4.
It is not necessary to calibrate subwoofer sound in
a surround sound setup. If you still wish to adjust
subwoofer sound when your speaker calibration is
complete, please refer to the chapter 'Adjust
picture and sound settings' on page 32.
>> Loudspeaker connections
Sound
1 Adjustment
2 Speaker type
3 Speaker distance
4 Speaker level
Front TV
0 (0)
Rear
0
Press MENU for automatic sequence
The two sound sequence options
AUTOMATIC
If you select the automatic sequence, the sound
shifts automatically between the external
speakers every 2–3 seconds. To adjust the
speaker levels, you must move the cursor to the
speaker you want to adjust first.
MANUAL
If you select the manual sequence, the sound
follows the speaker you highlight on the menu.
You can then adjust the sound accordingly.
The sound level from the BeoVision Avant
speakers functions as your point of comparison
with the external speakers and can not be
adjusted here.
> Switch on the system and press MENU to call
up the main menu.
> Press 3 to call up the Setup menu (4 if Sat is
available).
> Press 2 to call up the Sound menu.
> Press 4 to call up the Speaker level menu. TV is
highlighted and sound is cut in on the
BeoVision Avant speakers.
> Press or to adjust the speaker sound and
▲ ▼
ss or tt to move to another speaker.
Front
0
> When you have adjusted the sound for all the
speakers in your surround sound setup, press
GO to store your settings or press EXIT to leave
the menu.
Rear
0
Once you have performed your speaker calibration,
you will only need to re-calibrate the speaker
sound if you make changes to the setup, e.g. if
you move one or more of the speakers.