Table of Contents
Advertisement
22
You can make BeoVision Avant find
your TV and satellite* channels for
you, or you can key in the exact
frequency yourself.
You can preset 99 different TV
channels and 119 different satellite
channels on channel numbers of
their own. Furthermore, you can give
each channel a distinct name.
*NOTE! It is only possible to tune in satellite
channels if your BeoVision Avant is equipped
with the built-in satellite receiver module.
Tune in TV or satellite channels
When you set up BeoVision Avant for the first
time, you can tune in those TV and satellite
channels that are available in your area via
the TV tuning and Sat tuning menus.
BeoVision Avant finds available channels and
stores them by number and name.
TV tuning
1 Edit TV list
2 Add program
3 Auto tuning
4 Manual tuning
Freq
Pr
210 12
> Switch on the system and press MENU to call
up the main menu.
> Press 3 to call up the Setup menu (4 if Sat is
available).
> Press GO to call up the Tuning menu.
If your BeoVision Avant is not equipped with the
built-in satellite receiver module or the system
modulator, the TV tuning menu will appear
automatically. Otherwise,
Press GO again to call up the TV tuning menu,
or press 2 to call up the Sat tuning menu.
> Press 3 to call up the Auto tuning menu. The
Freq (frequency) and Pr (program) fields are
shown.
> Press
to start automatic tuning. The content
▲
of the frequency and program fields will show
your progress.
When tuning is completed, you can rearrange,
delete or rename channels from a channel list. This
list also appears if you press STOP during auto
tuning. Refer to the chapter 'Edit tuned TV or
satellite channels' on page 24 for information
about editing the channel list.
Advertisement
Table of Contents
