BEOVISION Avant DVD Reference Book page 31

With the BeoVision Avant motorised
stand you can turn the entire system
to the left or right using your Beo4
remote control.
Furthermore, you can program the
Avant to rotate automatically to face
your favourite viewing position when
you switch on the TV, and turn away
to a stand-by angle when you switch
it off.
You can also turn BeoVision Avant to
the desired positions manually.
Set positions for BeoVision Avant to turn to
Choose one stand position for when you
switch BeoVision Avant on and one for when
you switch it off.
Setup
1 Tuning
2 Sound
3 Picture
4 Stand
5 Connections
6 Menu
7 Clock
Stand position
1
Turn TV to preferred position
Choose stand position 1 for primary viewing
position, 2 for secondary viewing position, or 0
for stand-by position.
You can also choose a secondary viewing
position, if you have more than one favourite
viewing angle.
> Switch on BeoVision Avant and press MENU to
call up the main menu.
> Press 3 to call up the Setup menu (4 if Sat is
available).
> Press 4 again to call up the Stand menu.
until the appropriate stand position is
> Press
▼
displayed.
ss tt
> Press or to rotate BeoVision Avant to the
desired position.
> Press GO to store the position.
> Repeat the procedure for other stand positions.
> Press EXIT to leave all on-screen menus.
31