Table of Contents
Advertisement
The second Sat manual tuning menu...
Fine (fine tuning)
Fine tune within a range of ±7 to find the best
possible picture quality.
Decoder
If you have only one decoder connected, your
options are ON or OFF. If you have two
decoders connected to BeoVision Avant, you
can choose between Dec1, Dec2, or OFF.
System (satellite broadcast system)
You can switch between the following systems,
PAL, MAC or BB (BaseBand). If you set System
up to the MAC or BB options, it will not be
possible to select or set options for Sound.
Format
Two settings are available. You can store a
picture format for each satellite channel. The
default setting is 15:9, but if 'noise' appears in
the right and left side of the picture, choose the
14:9 format instead. The curtains on the TV
screen will hide the 'noise'.
Refer to 'Make the picture fill out the screen' on
page 49 for more information.
Sound (mono/stereo/language)
Several types of sound may be available for a
particular satellite channel, e.g. both stereo and
mono sound, or several different languages.
Press
or
to switch between the options
▲
▼
currently transmitted, and stop when the sound
you wish to store is heard and/or displayed.
Alternatively, you may have to call up a sound
tuning menu to tune in the appropriate sound
frequency. Call up the Sound tuning menu by
pressing MENU when Sound is highlighted.
Refer to 'Change sound type or language' on
page 37 for more information about the various
types of sound available.
What's on the Sound menu...
Sound
Stereo and Mono sound are available.
(Freq (Frequency))
Only applies for when Mono sound is selected.
Tune in the mono sound frequency.
(Left – Right)
Only applies if Stereo sound is selected. Press
or
to select a frequency for the left channel,
▲
and the right channel will be adjusted
automatically.
(Bandwidth)
Only applies if Mono sound is selected. The
following options are available: 130 KHz,
280 KHz, and 450 KHz. Use
▲
options. If Sound is set to Stereo, the bandwidth
is set to 130 KHz automatically.
Deemphasis
De-emphasise the sound signal, so that it
corresponds with the degree of emphasis with
which it was transmitted. Options are 50, 75, or
J17.
Expand
Expand the sound signal. Applies if the
transmitted sound is a stereo signal. Expand
compensates for the deviations bass and treble
undergo during transmission. Options are On
and Off.
Sound level
Select a sound level for a channel. As some
channels broadcast programmes with different
sound levels, you can e.g. choose to turn the
preprogrammed sound level down. Options are
Normal and Low.
Picture
Indicates whether the channel is a satellite Radio
station or TV channel. On indicates that the
picture screen will be switched on for satellite
TV channels, and Off indicates that the picture
screen will not be switched on, as only radio
sound is available.
▼
or
to reveal
▼
27
Advertisement
Table of Contents
