Table of Contents
Advertisement
You can connect different types of
audio and video equipment to
BeoVision Avant, such as a satellite
dish, a video tape recorder or a
CamCorder.
When connecting equipment to your
BeoVision Avant, use the AV socket
on BeoVision Avant first, if it is
vacant. However, a video tape
recorder must be connected to the
V.TAPE socket.
Please refer to the User's Guide
included with your equipment to
make sure it is connected properly.
Remember to register all connected
equipment. Refer to Register extra
equipment on page 20 and The
socket panels on page 56 for more
information.
Connect other equipment
Satellite dish
The connection of an analogue satellite dish
to the BeoVision Avant requires a built-in
satellite receiver module. Likewise, if you
want to connect a polarotor, etc., your
BeoVision Avant must have an external
positioner box. Please contact your Bang &
Olufsen retailer.
For specific information about how to set up
and use your satellite system, please refer to
the guide enclosed with the satellite module
(BeoSat – dish and decoder setup) and to the
BeoVision Avant Guide.
Video tape recorder
Use a 21-pin cable to connect a BeoCord
V 8000 video tape recorder to the V.TAPE
socket on BeoVision Avant. Connect the cable
from the aerial to the input socket on the
video tape recorder. Forward the aerial signal
to the aerial socket on BeoVision Avant.
Video game, CamCorder, etc.
We recommend that you use the close-up
sockets for equipment you connect on a
temporary basis, e.g. video games or
CamCorders. These sockets are placed directly
below the close-up operation panel. The use
of close-up sockets is explained in the chapter
The close-up socket panel.
AV 2 Expander
The optional AV 2 Expander accessory enables
you to connect more than one piece of extra
equipment to one socket on BeoVision Avant.
You can connect a decoder, a compact video
disc player, and other equipment to
BeoVision Avant via the AV 2 Expander.
Use a 21-pin cable to connect one plug to the
socket marked TV on the Expander box, and
connect the other plug to the socket marked
DECODER on BeoVision Avant.
15
Advertisement
Table of Contents
