Table of Contents
Advertisement
1
2
3
A
B
C
The cables should be handled with care. When
running any cable, avoid bending it sharply or
twisting it. Avoid subjecting the cables to
pressure or impact.
Mounting the base plate
When you have placed the BeoVision Avant,
you must fasten the base plate cover:
> The cover has been furnished with strips of
double-coated tape. Before you fasten the cover
permanently, try putting it into place first
1
without removing the tape backing.
2
> Lift off the cover again, remove the tape
backing, and fasten the cover to the base plate.
Overview of display, close-up
operation and connection panels
The illustrations show the placement of the
display, the mains connection and the various
socket and connection panels on the
BeoVision Avant:
4
1 Avant display bar
5
2 Close-up operation and socket panels
3 Mains connection
4 Power Link and digital input socket panel*
5 AV and aerial socket panel
Running the cables
To allow for the movement when the
BeoVision Avant turns, it is essential that the
cables are run and fastened as depicted:
> Turn the BeoVision Avant all the way to the left.
> Run the cables from the AV panel (and the
speakers panel) behind the bracket (A) and in a
loop to the bracket (B).
> Fasten all cables neatly to the bracket (B) with
two cable bands.
> Run the cable bundle in a broad loop to the small
bracket protruding from the base plate, and
fasten the cables neatly to it with two cable
bands (C).
> Tug the loop of cables neatly into the space
provided.
Mains lead
The supplied mains lead and plug are specially
designed for the TV. If you change the plug or in
any way damage the mains lead, it will affect the
TV picture adversely!
*NOTE! These sockets are only available if your
BeoVision Avant is equipped with the built-in
surround sound module.
7
Advertisement
Table of Contents
