BEOVISION Avant DVD Reference Book page 33

Change volume, bass, treble or
balance
You can adjust sound volume directly on the
Beo4 remote control at any time without
calling up a menu, but you must call up the
Sound menu to be able to adjust bass, treble,
loudness or balance.
Setup
1 Tuning
2 Sound
3 Picture
4 Stand
5 Connections
6 Menu
7 Clock
Sound
1 Adjustment
2 Balance
Volume Bass Treble Loudness
Counter Tape Speed
32 0 0 On
Time used 240 SP
What's on the Adjustment menu...
Volume
The volume level can be adjusted in steps of two
within a range of 00 to 72.
Bass
Bass tone can be adjusted in steps of one
within a range of -6 to +6. 0 is the neutral
setting.
Treble
Treble tone can be adjusted in steps of one
within a range of -6 to +6. 0 is the neutral
setting.
Loudness
Loudness can be set to On or Off. The loudness
function is used to compensate for the human
ear's lack of sensitivity to high and low
frequencies. It boosts the low and the high
frequencies when you are listening to low
volume levels so that the music becomes more
dynamic.
Subwoofer (only available if you have connected a
BeoLab 2 subwoofer to BeoVision Avant)
Can be adjusted in steps of one within a range
of -9 to +9. 0 is the neutral setting.
> Switch on BeoVision Avant and press MENU to
call up the main menu.
> Press 3 to call up the Setup menu (4 if Sat is
available).
> Press 2 to call up the Sound* menu.
> Press GO to call up the Adjustment menu.
ss tt
> Press or
> Press or
▲ ▼
item.
> Press EXIT to store your settings until you switch
off BeoVision Avant, or press GO to store your
settings permanently.
PDC&VPS Marker
On On
What's on the Balance menu...
Balance
The speaker balance can be adjusted by a
maximum of 6 steps to the left or to the right.
> < is the neutral setting.
To adjust speaker balance temporarily between
the five speakers in a surround sound setup,
Please refer to the chapter 'Home Theatre
viewing with BeoVision Avant' for more
information.
to move between menu items.
to adjust the settings for each
*NOTE! If your BeoVision Avant is equipped with
a surround sound module, the Sound menu lets
you calibrate your surround sound speaker setup
permanently. Please refer to the chapter
Loudspeaker connections – surround sound on
page 9 for further instruction.
33