BEOVISION Avant DVD Reference Book page 34

34
The Beo4 buttons give direct remote
control of a large number of
BeoVision Avant functions, and the
Beo4 display gives you access to even
more functions.
Whenever a source is displayed on
Beo4 (TV, RADIO, etc.), you can press
the LIST button and call up extra
functions in the display to help you
operate that source, just as if you
were calling up extra buttons. You
can also switch on extra equipment
connected to your BeoVision Avant.
Please note that Beo4 contains a list
of all of Bang & Olufsen's extra audio
and video functions, but only those
functions supported by BeoVision
Avant will work when you call them
up in the Beo4 display.
You can, though, customise your
Beo4 to suit your BeoVision Avant,
and change the order in which these
extra functions appear when you call
them up*.
Gain access to extra functions via Beo4
When a new function is added to the Beo4
list, you can then find this new cue in the
display the next time you operate your
BeoVision Avant.
• Press and hold the stand-by
button...
LIST ...then press LIST
Let go of both buttons
LIST Press until ADD is shown in the
ADD Beo4 display
GO Press to call up the list of
EDIT available cues. The first cue
appears in the display
LIST Press until the desired cue is
TRACKNG shown
GO Press to add the cue to the list.
ADDED A cue is added to the list when
ADDED is shown in the Beo4
display
TV LIGHT RADIO
SAT DVD CD
V TAPE RECORD A TAPE
7 8 9
4 5 6
1 2 3
TEXT 0 MENU
GO
LIST EXIT
STOP
*NOTE! Please refer to Beo4's own User's guide
for information about how to customise your list
of extra functions.