BEOVISION Avant DVD Reference Book page 23

You can tune in new channels or
re-tune previously deleted channels.
During this tuning process, your
previously tuned channels are left
alone. This allows you to keep
channel names, their order in the
channel list, and any special settings
you may have stored for those
channels, such as decoder or
broadcast system settings.
Add new TV or satellite channels
You can add new or previously deleted TV and
satellite channels to your channel lists at any
time using the Add program menu.
TV tuning
1 Edit TV list
2 Add program
3 Auto tuning
4 Manual tuning
Freq Pr
210 12
> Switch on the system and press MENU to call
up the main menu.
> Press 3 to call up the Setup menu (4 if Sat is
available).
> Press GO to call up the Tuning menu.
> Press GO again to call up the TV tuning menu.
To add satellite channels, press 2 to call up the
Sat menu.
> Press 2 to call up the Add program menu.
> Press to begin adding new channels. The Freq
▲
(frequency) and Pr (program) fields will show
tuning progress.
> Press STOP to stop adding channels. You can
then move, rename or delete channels from a
list, as described in the following chapter.
> Press EXIT when your channels have been tuned
in, named and placed in the order you choose.
23