Table of Contents
Advertisement
32
Picture and sound settings are preset
at the factory to neutral values which
suit most viewing and listening
situations. However, if you wish, you
can adjust these settings to your
liking.
You can adjust picture brilliance,
colour or contrast. Sound settings
include volume, bass, treble,
loudness and balance. You can also
adjust a BeoLab 2 subwoofer, if it is
part of your setup.
Your can store your picture and
sound settings temporarily – until
BeoVision Avant is switched off – or
you can store them permanently.
To change the picture format, e.g.
from 4:3 to wide screen 16:9, please
refer to the chapter Home Theatre
viewing with BeoVision Avant on
page 48.
Adjust picture and sound settings
Change brilliance, colour or contrast
Adjustment of the picture settings is done via
the BeoVision Avant Picture menu. Temporary
settings are reset to the neutral values when
you switch off BeoVision Avant.
Setup
1 Tuning
2 Sound
3 Picture
4 Stand
5 Connections
6 Menu
7 Clock
Brilliance
Colour
Contrast
32
32
44
What's on the Picture menu...
Brilliance
Picture brilliance can be adjusted in steps of two
within a range of 00 to 62; 32 is the neutral
setting.
Colour
Colour intensity can be adjusted in steps of two
within a range of 00 to 62; 32 is the neutral
setting.
Contrast
The contrast level in the picture can be adjusted
in steps of one within a range of 00 to 62; 44 is
the neutral setting.
For video sources using the NTSC signal a fourth
option – Tint (colour shade or nuance) – will be
available for adjustment.
> Switch on BeoVision Avant and press MENU to
call up the main menu.
> Press 3 to call up the Setup menu (4 if Sat is
available).
> Press 3 to call up the Picture menu.
ss
tt
> Press
or
to move between the items on the
menu.
> Press
or
to adjust the settings for each
▲
▼
item.
> Press EXIT to store your settings until you switch
off BeoVision Avant.
> Press GO to store your settings permanently.
Advertisement
Table of Contents
