Table of Contents
Advertisement
What's on the first TV manual tuning menu...
Freq (frequency)
Searching stops at the first channel producing
an acceptable signal. If you know a channel's
exact frequency number, key it in directly using
the number keys on the Beo4 remote control.
(System)
If System appears in the menu, make sure that
the correct broadcast system is displayed before
you start tuning:
B/G...
for PAL/SECAM B/G
I...
for PAL I
L...
for SECAM L
M...
for NTSC
D/K...
for PAL/SECAM D/K
All options may not be available, as this depends
on the television type.
Pr (program number)
Key in the program number (1–99) you wish to
give the channel.
Name
The name you give a channel will appear in the
TV channel list. A name may contain up to eight
characters, including the letters A–Z, numbers
and full stop. Press
or
to reveal the
▲
▼
character you want. Then press
to the next character position. Please refer to
Name tuned channels for more information.
More
If it is necessary to fill in extra information, move
to More and press GO. A second manual tuning
menu appears.
The second TV manual tuning menu...
Fine (fine tuning)
The TV automatically tunes to the best possible
picture. However, neighbouring channels may
blur the picture slightly, in which case fine tuning
may be required. The fine tuning range is ±8.
Decoder
If you have only one decoder connected, your
options are ON or OFF. If you have two
decoders connected to BeoVision Avant, you
can choose between Dec1, Dec2, or OFF.
Sound (mono/stereo/language)
Several types of sound may be available for a TV
channel. Examples can be stereo sound, mono
sound, or other languages. Press
switch between the sound modes currently
transmitted, when the sound you wish to store
is heard/displayed, press GO.
Refer to 'Change sound type or language' on
page 37 for more information about the various
types of sound available.
Format
Two picture format settings are available. You
can store a format for each TV channel. The
default setting is 15:9, but if 'noise' appears to
tt
to move on
the right and left of the picture, choose the 14:9
format instead. This enables the curtains on the
TV screen to hide the 'noise'.
Refer to 'Make the picture fill out the screen' on
page 49 for more information.
or
to
▲
▼
25
Advertisement
Table of Contents
